• RT @MomsCanCodePgh: Looking for #developers & #programmers to volunteer 1hr of their time to teach webinars online! Suggestions include: Be…

      Feb 19, 2018

IT WORKS! Don’t-worry-clock > part 2 < Arduino project

Arduino project - Heart in backpack

“Mommy, when are you coming to pick me up?” – “When your heart is fully lit, honey.” – part 2

I’ve made a cool toddler clock for my son Vico, who just started school a few weeks ago. He can use the clock to check how long it will be until I pick him up from school. It is stressful for him not knowing when we will be reunited again. With the clock, I’m hoping to take away his worry so he can enjoy his day more. He can’t tell time yet, so I thought of something different using an Arduino. In part one of this article I shared the first steps toward making this thing and in this part, I’ll (proudly) tell you about the final product and if Vico actually benefited from it.

Electro Lasagna

It was a race against time to get the toddler clock done before the first day of school, but I made it! It took really long before my special battery and battery shield arrived, and it had been a hot minute (20 years! I’m getting old…) since I soldered something. With shaky hands and a small drop of sweat on my forehead, I managed to solder the battery shield successfully together. Pffew!

Arduino project - Adafruit PowerBoost 500 shield solder

Heart clock apart

Then the time came to connect the parts together and switch on the power. I thought: “Did I figure this out correctly? Will it work? Here goes…” And there it went; little check lights appeared on the Arduino, and the battery shield, the dot matrix powered up and *BAM* the little red heart lit up! It’s alive, alive!!!!! I was so happy that I ran across the room holding my precious toddler clock in the air like:

simba animated gif

Yep, that’s how happy I felt!

The heart

My first idea for the animation for the dot matrix was to turn off one row of LEDs every hour. This way it visually counted down (check my mini video in part one). If all rows were turned off, school time would be over, and I’d come and pick him up. But rows are boring! So I thought of a little heart shape, that would fill up over the course of the day. (The video below shows a fast version of the animation.) To make thing even more clear for Vico, I stuck a little white heart on top of the dot matrix to enhance the effect. Also if for whatever reason the power would fail, the heart would be still there. I thought of it to be a little less disappointing for Vico if that would happen.

Also, the heart shape has a special meaning for us. I often draw a little heart on our wrist with lipliner. That way, if we miss each other on a work day, daycare day or school day, we can look at our little hearts and feel a little less far apart.

Depicted above: The assembled heart clock. I stuck the pieces on top of each other with adhesive velcro. 

Later, I realized I should protect the battery better than I did in this project. I should be put in some kind of a hard plastic box or something like that. Batteries like these are vulnerable and need to be tucked safely away as they can cause heat and even fire. We don’t want that. Maybe a 3d printed custom made container? I don’t know.  Any ideas anyone? Let me know in the comments below.

The snack box

Unfortunately, I didn’t have any time left to sew or attach the toddler clock to Vico’s backpack. It was literally the night before school, so I dove into the kitchen cabinets in search for a small box to put the clock in. Luckily I found a little snack box in which the clock neatly fitted. It even held the clock in its place tightly, and because of the white lid, it had a cool see-through effect at the top.

Heart in box

Above: The don’t-worry-clock in a little snack box, with cool see-trough effect. 

Did Vico benefit from the clock?

And now the mother of all questions; Did Vico feel less worried at school with this clock in his backpack? The answer (proudly) is: Absolutely! The clock gave him a sense of time and a sense of connection. When I showed him the clock for the first time, I told him I made “a special heart clock” for him. I explained what he could do with it and that if he wanted to know when I was coming to pick him up, he could peek into his backpack and look at the heart. Another interesting insight is that making this clock helped me cope better with this (stressful) period of change in our lives because I build something especially for him, which fits his needs. Let me tell you; that felt really awesome.

Next adventure: Toddler clock version 2.0

Vico used his clock in the first three weeks of school, after this period he was used to the new school, kids, and teachers. Now, he doesn’t need it anymore. Even though he doesn’t need it anymore, I want to make another version of this clock. A sturdier and smaller version. I’ll be using a very cool multi-colored LED-ring (3cm diameter!) with a very small battery. Giuliana, Vico’s little sister, will be going to school in 1,5 years and who knows, maybe the toddler clock will help her too!

16 NeoPixel Ring

Above: NeoPixel ring with 16 multicolored LED lights <3

I also want to improve the code I made for this clock because I think it’s probably very sloppy. (That didn’t make it less fun! ;)) I haven’t coded in years so I’m very rusty at it and with these kinds of projects I want to pick up my coding again so I can help my kids with their projects in the future.

To be continued!

I’m looking forward to your comments about this Arduino project. If you have any tips, ideas or comments, please leave them in the comments section below! 

Robo greets,

Francesca

This content is also available in: nlNederlands

Leave a comment